Best Way To Polyurethane A Floor

An 8 to 12 inch 20 to 31 cm bristle brush is a.

Best way to polyurethane a floor. Oil based polyurethane used to be preferred simply due to the fact that it was significantly more durable but the water based option has come a long way since its initial creation and now provides a hard and long lasting finish for your floor and if you get a good quality one they should last about the same length of time too. For a smooth coating you ll want the surface to be as smooth as possible so prepare the wood by sanding it with a sanding block or orbital sander. Use a paint stirrer to thoroughly stir the polyurethane.

Fold a clean cloth into a square roughly palm sized to apply your coats. Use a brush or painter s pad to apply a thin layer of polyurethane. Which finish is right for your hardwood floors.

The former is usually the more durable of the two. With each wipe overlap half of the previous wipe for even coating. The best practice is to apply three coats of polyurethane allowing the floor to dry and lightly sanding it between coats.

The standard method for applying an oil base polyurethane wood floor finish is with a bristled brush and a lamb s wool applicator. Apply a very thin coat of polyurethane with a fine brush foam pad or cloth. All polyurethane finishes are water resistant but flooring professionals advise using water sparingly if at all for cleaning.

Those from the factory and those applied on site. Polyurethane coatings brushed on vertical or contoured surfaces are more likely to drip and run. Forms a thicker coat so the finish builds up fastest.

Oil based polyurethane consists of linseed oil synthetic resins and plasticizers. Start with 120 grit sandpaper on refinished pieces and 80 grit on new wood. Work with the grain and avoid applying too much polyurethane to avoid raising the grain.