Paint Plywood Floor
We coated our plywood floor in enamel paint which comes only in a satin finish.
Paint plywood floor. Coating the plywood floor 1. Choose enamel latex paint for the best protection. Use a 3 in 7 6 cm paintbrush to.
Put on your dust mask and safety glasses then sand the plywood to ensure you remove. Pour the paint into a clean paint tray. You can still get a new look for the floor when you rip up the carpet and paint the plywood sub floor.
If you want new flooring but can t afford it don t fret. Place your stencil in one of the corners of the room with a few pieces of painters tape. So lets say you buy a house with ruined carpets my case dog pee and poop and you don t want to put new carpets in for a few years.
Clean up all the sand and dust you created with a vacuum cleaner with a hepa filter. It is a very budget friendly update that will give the room a whole new look for the cost of a few gallons of primer and paint. If you live in an area where oil based paints are prohibited consider using a.
When the floor is dry paint on a coat of primer or. Fill in knot holes cracks and. Pry open the lid of the paint can carefully so you don t spill any.
If you want a semi gloss or glossy look you can use that type of paint but you must protect it with a layer of. We used two coats of paint on the floor. It delivers exceptional block resistance as well as resistance to dirt especially in high traffic areas like the entrance to this room.