Hardwood Floors Gaps Between Boards
Hardwood gaps are generally caused by one of a few installation errors.
Hardwood floors gaps between boards. Once the glue has dried remove the excess wood using a block plane so that the floor becomes smooth over the patch site. There are several things that may affect the appeal of your hardwood floor and gaps caused by floorboards which have separated are definitely one of. Clean the floor clean the floorboards on both sides of the gap using a slightly dampened cloth.
The air absorbs what is left of the water in your wood and the boards shrink down. This restores moisture to the air and subsequently to your wood floors. Failing to keep boards straight when working around an outside corner.
Next use a hammer with some sort of padding or a rubber mallet to drive the strips tightly between the boards allowing a tiny bit to remain above the floor level. Cut the strips and apply wood glue to both sides. Improperly acclimating the hardwoods prior to installation.
Clean up and let the putty dry let the putty set up then wipe gently along. If you notice the problem soon enough you can often correct it by simply installing a humidifier in the affected area. When temperatures vary hardwoods can expand and contract creating gaps.
Or installing boards that are not uniform. Failing to install the first board perfectly straight in a hardwood flooring installation. As the boards dry out they are likely to form voids as the wood shrinks.
The gaps are especially noticeable in areas of the home closest to water and humidity such as bathrooms and kitchens and in high traffic areas.